| Extend your workspace with
the CAT5-1000 HD
The ex•tend•it CAT5•1000 HD KVM (keyboard, video,
mouse) extender sends a DVI display and USB keyboard and mouse up
to 150 feet from your DVI or HDMI source. It's designed using technologies
that allow industry-standard CAT-5 cable to support the high resolutions
of digital video plus USB peripherals.
How it works
The CAT5•1000HD sender unit sits next to your computer. The
cables supplied with the CAT5•1000HD connects your DVI source
and USB to the send unit. The CAT5•1000HD receiver unit sits
next to your DVI display - up to 150 feet away. The display and
USB plug into the back of the CAT5•1000HD receiver unit. Two
CAT-5 cables connect the CAT5•1000HD-S and the CAT5•1000HD-R
units to each other.
The CAT5•1000HD is HDCP compliant.
Package Includes:
the CAT5•1000HD-S
the CAT5•1000HD-R
One 6 foot DVI to HDMI Cables
One 6 foot USB Cable
Two 5V Power Supply
User's Manual
DVI, HDCP & HDMI Defined
Features:
Uses CAT-5* cable for DDC and control signals
Extends any DVI (Digital Video Interface) compliant device up to
150 from the computer
Extends USB 1.1 compliant devices up to 150 from the computer
Saves space on your desktop Increases productivity
Eliminates computer noise where you work
Supports VESA Standard resolutions and HDTV resolution
Supports DDWG standard for DVI compliant monitors
Installs in minutes
Specifications:
Video Amplifier Bandwidth: 1.65 GHz
Single Link Range:1080P/1920 x 1200
HDCP Compliant
Input Video Signal:1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Video HDMI Input Connector: 19 pin Type A
Video DVI Output Connector: DVI-I (29 pin) female, Supports ONLY
Digital Signals
USB Input: USB type "B" Connector
USB Output: Two USB type "A" connectors
Link Connector: RJ-45
Power Supply: 5V DC (External)
Power Consumption: 15 Watts (max)
Dimensions: (8.4”in./213.36mm) W x (1.75”in./44.45mm)
H x (4.4”in./111.76mm) D
Shipping Weight: 7 lbs.
*Note: For distances over 100 ft. shielded CAT-5 cable for video
is recommended for optimal video quality. The DDC CAT-5 cable does
not need to be shielded.
|
